福恒润德

Production + construction one-stop service sports wood
flooring manufacturersProduction + Construction of one-stop service manufacturers

Service Hotline: 400-680-9971

Keyword search: Sports wooden floor priceSports wood flooring pricesSports floorSolid wood sports flooring manufacturers

主辅龙骨地板,版式龙骨地板
当前位置首页 » 福恒新闻中心 » Industry information » Small knowledge outside the sports wooden floor GB

Small knowledge outside the sports wooden floor GB

返回列表 分享到:
查看手机网址
扫一扫!Small knowledge outside the sports wooden floor GB扫一扫!
浏览量:- 发布日期:2016-02-26 09:44:00【  

From products to paving, sports wood flooring industry, national, various standards pile up a thick glimpse. But apart from these, there are those you didn't notice. You don't need to look at these standards before buying a floor, but the following aspects must be clear:

体育木地板

1, size and deviation

In the national standard, the requirements for the width and thickness of the floor cannot be deviated. In practice, a length deviation of 0.4 mm, 0.3 mm, and one thousandth is allowed. However, the sports wood flooring industry also has 17mm plates for sale. The price is 10 to 15 yuan cheaper per square meter. Most of them are biased in one processing, and then processed into thin plates. But if the national standard is 18 mm, but it is actually a lot worse, then this is a kind of fraud, so after taking the floor, you may wish to take a few measurements.

2, shape position deviation

It is obvious that the edge of the floor is severely tilted by the ruler. Such a piece of the floor has two pieces, which is more difficult to lay out and affects the appearance. Horizontal and vertical, the size is regular, which is the most basic requirement of the floor. After unpacking the purchased wooden floor, take out a few pieces, carry out simulation assembly, observe the bite of the mouth of the mouth, assemble the gap, and the height difference between adjacent plates.

3, appearance quality requirements

The appearance quality of the board surface is one of the important basis for floor grading. The "solid wood floor" national standard will be divided into superior, first-class, and qualified products, but the market is basically unified as a qualified product. When purchasing, the board surface has cracks, decay, dead knots, insect eyes, blue changes, lack of edges and other material defects, and usually does not have to be too demanding for chromatic aberration, joints, textures, etc., which is the natural property of wood. In addition, the color plate meets some people's preferences, but it must also prevent some manufacturers from filling the color after shoddy.

4, paint

For the sports wood flooring industry, it is less time to paint a lacquer, save money on painting, labor, and save time, but consumers can't see it. Only after using it can the difference be seen. There are also inferior paints, or the PU paint is made of UV paint, which is easy to cause the floor paint to fall off and crack. In the national standard, the surface wear resistance, hardness and adhesion of the lacquered board are required. When you purchase, you should choose a uniform, smooth and smooth lacquer finish, no leaking paint, no bubbling, no cracking floor.

5, water content

The national standard for the moisture content of the floor is between 7 and 15.6%, and the span is very large, which can be achieved by most manufacturers. The moisture content of the floor is unqualified, except for improper handling by the manufacturer, and the environmental humidity of the paving site is too high, and the moisture-proof measures are improper. Therefore, it is necessary to get the floor with the right moisture content. It is also necessary to have good paving moisture and reasonable maintenance.

6, paving

The complaints caused by the pavement are more than the quality of the floor itself, the factors of poor paving technology, unqualified accessories, and some owners are too picky. At present, there are "Code for Acceptance of Wood Flooring Surface Layers" and related paving standards, and whoever sells and who is paved as much as possible. When paving, the owner is best to be present, first check the keel to see if it is flat, firm, and not cracked. Then wait for the floor to be inspected again, see the flatness, the gap size and the height difference, whether there is a sound.

7, name specification

The name is not standardized because it is a customary name, it is difficult to correct in a short time, and some manufacturers deliberately confuse materials with similar colors and patterns, but with different quality, and use the information asymmetry of buyers and sellers to obtain benefits. At present, the relevant departments have investigated and dealt with the problem of non-standard names according to the "China's main import timber list" and other standards.

8, after sales service

The warranty for the wooden floor is the responsibility of the floor installer, and most manufacturers now have a one-year warranty. After the problems of arching, bluening, cracking of the insects, quality of the paint surface, damage of the board surface, discoloration of the board surface, etc., the responsibility is defined according to different degrees. The owner's use and maintenance is also very important. By regularly cleaning and waxing, use the mop without dripping to wipe the floor direction, prevent the sun from being exposed for a long time, and move heavy objects, etc., to lift it, not towing.

 来源:福恒 作者:张雷