福恒润德

Production + construction one-stop service sports wood
flooring manufacturersProduction + Construction of one-stop service manufacturers

Service Hotline: 400-680-9971

Keyword search: Sports wooden floor priceSports wood flooring pricesSports floorSolid wood sports flooring manufacturers

主辅龙骨地板,版式龙骨地板
当前位置首页 » 福恒新闻中心 » company information » Sports floor laying, five major problems need to be solved

Sports floor laying, five major problems need to be solved

返回列表 分享到:
查看手机网址
扫一扫!Sports floor laying, five major problems need to be solved扫一扫!
浏览量:- 发布日期:2016-06-01 15:33:29【  

The most popular phrase in the sports wood flooring industry is 'three points by quality, seven points by installation'. The installation process went wrong, and the quality of the wooden floor is also good. However, for a long period of time, consumers simply pay more attention to the product than the emphasis on the installed technology and accessories. Relevant experts reminded that five situations should be prevented when laying wooden floors.

体育运动地板

1. Prevent over-tightening or over-tightening

When buying wood, you must go to a regular manufacturer, not an unknown manufacturer. Because the timber of the regular manufacturers is usually dried in the production area, and then shipped in containers, the regular manufacturers directly process them further and then transport them to the construction venues, which reduces the chance of wood moisture. If you are not at ease, you may wish to use a hygrometer to check the moisture of the wood at the time of purchase, so that you can be foolproof. It should be reminded that after the wood is bought back, it should be placed in the house for two or three days, and then the gas phase is adapted to the construction. Before the construction, the ground should be kept dry and the moisture-proof layer should be laid. In this way, the wood will basically no longer have the problem of deformation.

2, to prevent the use of wooden wedges and nails fixed way

In the construction, the method of fixing the wooden wedge and the nail is used, which may cause the nail holding force to be too small due to the small contact surface between the wooden wedge and the nail, which may easily cause the wooden keel to loosen, and the sound will be heard when the floor is stepped on.

3, to prevent the length of the floor and the direction of the door is inconsistent

During construction, it must be noted that the length of the floor should be consistent with the orientation of the door to ensure a good visual effect.

4, to prevent ground unevenness

Make sure that the floor is dry, flat and free of debris. Usually the floor installation should be carried out after the completion of other decoration works. The uneven floor will make some floors and keels floating, and will sound when pedaling.

5, to prevent the keel from drying

The moisture content of the un-dried wood keel is usually about 25%, and the moisture content of the qualified wood floor is generally 12%. The humidity difference will cause the wooden floor to quickly absorb moisture, causing the floor to erect and the paint surface to burst. The floor is laid before construction and then other construction is carried out on the floor. However, after the floor is laid, it often takes a month or more to polish the paint. During the period, the floor and the surrounding water vapor and chemicals did not provide any isolation measures, which may cause the wood floor to be deformed due to the sharp change of water content. It is advisable to use dry, straight wood for the keel and the size is 3×2.0cm or 4×2.5cm. After ensuring the keel level, fix the keel and the ground with steel nails.


 来源:福恒 作者:张雷