福恒润德

Production + construction one-stop service sports wood
flooring manufacturersProduction + Construction of one-stop service manufacturers

Service Hotline: 400-680-9971

Keyword search: Sports wooden floor priceSports wood flooring pricesSports floorSolid wood sports flooring manufacturers

主辅龙骨地板,版式龙骨地板
当前位置首页 » 福恒新闻中心 » Industry information » Five steps in the basic processing of dance wood flooring

Five steps in the basic processing of dance wood flooring

返回列表 分享到:
查看手机网址
扫一扫!Five steps in the basic processing of dance wood flooring扫一扫!
浏览量:- 发布日期:2016-06-16 15:26:29【  

With the rapid development of social economy, people have more and more demand for dance wood flooring, and the application range of dance floor is also wider. Of course, the basic treatment is very useful for the dance floor. The following small series introduces the dance room wood in detail. What are the basic processing steps of the floor?

舞蹈木地板


1. Technical points and anti-retract technology solutions

The laying of the floor is mainly to combine the fixing parts, the wooden keel, the wool board and the panel into a whole body. The overall wooden floor and the wall surface have a gap of 10mm, which ensures the expansion and contraction space of the sports floor, and also ensures the keel and the board. Vent the floor so that it does not get wet, deformed or corroded.

2, wooden keel laying

The wooden keel is made of 70×50mm pine wood and has been carefully selected. It is strictly forbidden to use it if it does not meet the requirements. After the ground leveling, the keel fireproof and anti-corrosion treatment, laying 70×50mm main wood keel, the spacing of each main wood keel is 489mm. Fix the keel up and down with the planting wire, the auxiliary keel is 50×70mm, fix the adjustable rubber elastic block to the bottom of the keel, the wooden keel must be adjusted with the horizontal height of the adjustable rubber elastic block, and the lower pad can adjust the rubber elastic block. .

3, laying the wool floor (flammable plywood)

The base plate is made of 18mm flame retardant plywood and fixed above the keel. After the base layer of wool is laid, it is leveled. The 3 meter ruler checks that the surface flatness does not exceed ±3mm. If you do not meet the standards, you will not proceed to the next process.

4, moisture-proof shock absorption layer

A layer of moisture-proof insulation pad is placed between the surface layer and the base floor to achieve moisture-proof isolation, shock absorption and sound absorption.

5, the laying of the floor

The international standard stage wooden floor is covered with a sloping floor covering, and the paint is made of UV-curing lacquer for German wood flooring. It has the special requirements of wear-resistant anti-skid stage wooden floor, and has improved the disadvantages of sanding, painting and polluting environment, non-environmental protection, low hardness and poor wear resistance. It is directly painted in the factory and adopts the most advanced paint. Line, one-time molding technology is extremely high.

The panel is laid perpendicular to the upper keel at 90 degrees, and the surface layer is laid 20 mm from the wall. The fixing of the surface layer is fixed by the electric drill at the lower layer of the tongue, and is fixed on the wool floor with a special floor nail. The floor should not be too tightly packed to prevent thermal expansion and contraction deformation, thereby ensuring the floor. Firmness and durability.


 来源:福恒 作者:张雷